Our experience, up-to-date equipment and technologies are concentrated on fulfillment of the most non-standard ideas and wishes of our customers.

Frunze Plant began to produce perforated sheets and coils , width up to 1500 mm , material: cold rolled steel and other metal . Before the present time, we offered maximum width of perforated sheets 1000 mm ( 1250 mm).
We are able to produce perforated sheets in width of 1500m, with round holes – 2,0mm; 5,0 mm; 6,0 mm; square holes 5x5 mm, 10x10mm. Upon request we are ready to produce perforated sheets with other holes in width of sheet ( coil) up to 1500mm.

Frunze plant has passed certification procedure ISO 9001:2008 successfully Audit by the dutch company TNO showed that quality system management of Frunze Plant meets the requirement of ISO ISO 9001:2008 Frunze plant conformed the standard thrid time ( first time in 2003, second in 2006)

Invite you to visit our display stand - Frunze Plant JSC in one of the biggest agricultural exhibition of Ukraine Agro 2010, which will held from 15 to 19 June 2010

Frunze Plant JSC has opened representative office in Kazakhstan in order to increase its presence in Central Asia.

Сhairman of the board of directors Mr. Alexander Vasylenko said that the result of establishing representative office should be sales growth in Kazakhstan. «Market of Kazakhstan and generally Central Asia is a very significant for us there are large opportunities for promotion our products» - he emphasized.

Attracted the attention of the journalist s to the enterprise, which is in a difficult economic environment is not only "survive", but also actively developing. They talked to the chairman of the board , deputy chairman of the board on marketing, looked over workshops, made an interview. to see all report please go the following link.

At 13th of September,2009 the international extra-class rally 'Silk Way' had finished in Ashgabat.

The greatest out-of-road rally, organized under the supervision of the famous rally "Dakar' series, attracted as the pilots from all over the world, so the pilots-amateurs from 31 countries.

Among the participators of this rally, who had driven along the whole route along the territories of Russia, Kazakhstan and Turkmenistan there JSC Frunze Plant team from Kharkov.

Participating in rully like this firstly, Kharkov team consisted of two top-managers of our company: the Chairmen Alexander Vassylenko (as navigator), and the member of Supervising Board Alexander Romanenko (as pilot), had surely overcame the way more 4,5 thousands kilometers lenght, and had finished at the central square of the capital of Turkmenistan.

As remarked Mr. Alexander Vassylenko, after his coming back to Kharkov, participation in this rally, besides of its sport part, no doubt, included and presentation of Kharkov to the citizens of another countries, and the advancement of the Ukrainian modern technologies, all around the CIS. sucsessfully

The range of our products is added with the new model of refuse bin Magistral. While the process of exterior design and features stuctures, we paid attention to the demands estimated by the foundators of the events, like Euro-2012.A big volume of the tank for waste, possibility to provide hard fixing to the flatness, and optional ability to use sides of the product as advertising show-place: all these factors are actual, when we use it in places, which are visited by many people , such as railway stations, airports, stadiums e.t.c.

More than 200 pieces of the metal wardrobes, made by our company in April, 2009 were installed in the building of Children Football academy which is the part of the Metallist Football club . During the matches of EURO-2012, this building of the Academy will be used as a hotel. We're ready to process the new orders!

     Now our clients can get a sufficient economy in Euro and USD, purchasing perforated metal with a round holes: 3mm diameter in the metal with thickness 3mm, 4mm diameter in the metal with thickness 4mm, 5mm diameter inthe metal with thickness 5mm, and another slots.
Perforated metal with a round hole diameter, which is equal to the metal thickness, can be purchased in Ukraine now - the new perforating equipment with a SOENEN (Belgium) press was succsessfully tested and started its work in our company!
      Now, while metal sheet stamping the maximum size of product may be:width 1250mm (1500mm)х lenth 3000mm. When the source of metal is coil, with a width up to 1500mm, the lenth is possible according customer demands.
     We're expecting your orders for perforated metal: diam.3.0mm in 3.0mm thickness, diam.4.0mm in 4.0mm thickness, diam.5.0mm in 5.0mm thickness and another!

As around conditions which accompanies as our company, so our customers, become toughter, top-management of our company decided to apply in industry the increase efficiency project for production, according Lean Production principles. This project implemention will allow us to make terms of order prossesing shorter, and to decrease the prime-cost. We are sure, that these actions accompanied with following measures, like: special price estimated for the some product groups, will make influence of the crisis moments lower, not only for our company, but and for our partner's businesses too. Saying the other words, now order's executing will be faster, but their cost will be lower.